NOTE** If something you need is "out of stock" on this page, please email or call us and we'll get you on the backorder list for it. Demand for everything, including accessories on this page, has been crazy since Q2'24.
Brake Threads: 1/2-28, 5/8-24, 9/16-24, 3/4-24, 3/4-28, M18x1.0, M18x1.5, M15x1.0 (RH)
Ionbond DLC finish (monocolor dark gray)
Peel washer included.
* NOTE: 1/2-28 threads are NOT AVAILABLE for larger than .223 caliber bores because the root diameter
of the threads leaves too little wall thickness. Please refer to our thread specifications page for more information.
The SR NON-TIMED-BRAKE (NTB) is a version of the SR brake that does not require timing and is
ideal when the shooter will almost always be shooting suppressed. The brake performance
of the NTB when the suppressor is not being used is reduced vs. the normal SR brake due to its smaller
ports. It has ports in 3 of its 6 sides.
Ionbond DLC finish (monocolor dark gray)
* NOTE: 1/2-28 threads are NOT AVAILABLE for larger than .223 caliber bores because the root diameter
of the threads leaves too little wall thickness. Please refer to our thread specifications page for more information.
Brake Threads: 1/2-28, 5/8-24, 9/16-24, 3/4-24, 3/4-28, M18x1.0, M18x1.5, M15x1.0 (RH)
Ionbond DLC finish (monocolor dark gray)
Peel washer included.
* NOTE: 1/2-28 threads are NOT AVAILABLE for larger than .223 caliber bores because the root diameter
of the threads leaves too little wall thickness. Please refer to our thread specifications page for more information.
The 223 and 30 cal NON-TIMED-BRAKE (NTB) are an abbreviated version of the CB brake and are intended for
mounting the CB series suppressors when the shooter will almost always be shooting suppressed. The brake performance
of the NTB when the suppressor is not being used is significantly reduced
vs. the normal CB brakes due to its reduced size. These brakes do not have to be timed and have ports in all directions.
Ionbond DLC finish (monocolor dark gray)
* NOTE: 1/2-28 threads are NOT AVAILABLE for larger than .223 caliber bores because the root diameter
of the threads leaves too little wall thickness. Please refer to our thread specifications page for more information.
Our DTHUB adapter allows you to connect your HUB-configured suppressor to a direct thread interface on your rifle.
THIS IS FOR "HUB" SUPPRESSORS ONLY--NOT CB NOR BA NOR SR.
Titanium.
Ionbond DLC finish
1.48 ounces (1/2-28 threads)
1.38 ounces (5/8-24 threads)
1.31 ounces (11/16-24)
Semi-permanently converts a BA series suppressor to accept
the CB series of muzzle devices.
Ionbond finish.
The CB2HUB allows you to use our CB muzzle devices on HUB-configured suppressors, such
as our Dominus-HUB or Magnus-HUB. It should also fit and work on any HUB-compliant
suppressor from others manufacturers, although we can't account for variances
in those products.
Titanium.
Ionbond DLC finish.
1.18 ounces
Flash hider mount for CB series suppressors.
Ionbond finish.
Replacement O-Rings are available.
These are OEM O-Rings and are not suppressors parts.
Brake Threads: 1/2-28*, 5/8-24, 9/16-24, 3/4-20, 3/4-24, 3/4-28, M18x1.0, M18x1.5
* Note: The 1/2-28 30BA brake has a .223 caliber aperture.
Black Oxide finish. Peel washer included.
Brake Threads: 5/8-24, 3/4-20, 3/4-24, 3/4-28, M18x1.0, M18x1.5
* Barrett .338 rifles manufactured prior to 1/2013 use MRAD brake; manufactured
after 1/2013 use 3/4-24 brake.
Black Oxide finish. Peel washer included.
Outside diameter 0.840-0.845"
Initial thickness of approx 0.048-0.055"
Layer thickness approx 0.002"
Price is per each.
External thread protector for BA and CB series.
30BA thread protector fits both 30BA and 338BA series.
Fits all CB series muzzle devices.
MADE BY ARMAGEDDON GEAR
FITMENT GUIDE
5-inch cover fits 30PSS, 30CB5, and ULTRA 5.
7-inch cover fits ULTRA 7, 30CB7, 30BAS.
7.2-inch cover fits 223P-2, 223CB.
9-inch cover fits ULTRA 9, 30P-1, 30CB9, 30BA
10.4-inch cover fits 338BA
Use on 223A is not recommended.
MADE BY ARMAGEDDON GEAR
FITMENT GUIDE
6.5-inch pouch fits cover fits ULTRA 7, 30CB7, 30BAS, 30PSS, 30CB5, ULTRA 5, 223P-2, 223CB. (ULTRA 5 and 30PSS will be "deep fit")
8-inch pouch fits ULTRA 9, 30P-1, 30CB9, 30BA,
10-inch pouch fits 338BA (1.8" diameter).
We sometimes have cosmetic seconds available at a large discount for some of our brakes. These are 100% fully functional but have a cosmetic issue preventing them from being perfect visually. The reasons are typically either light engraving or light tool marks. We do not take backorders for these; they are available to order only when there is inventory on this page.
