MODEL 30BAS SUPPRESSOR

The 30BAS was discontinued May 2014 and replaced with the 30CB7. Click here to proceed to the 30CB7 specs page. We will continue to support 30BA-series customers. 30BA brakes will remain for sale. 30BA and 30BAS suppressors may still be ordered on a special-order basis for customers already invested in the 30BA system.


Brake-attach .30 caliber suppressor, short.

The model 30BAS is the seven-inch "Short" version of our brake-attach 30BA suppressor. It is two inches shorter and three ounces lighter than the 30BA. It only gives up approximately 2-3 dB suppression for a noticeably smaller and lighter format. The 30BAS is designed to mount over our muzzle brake. It is particularly suited to applications where the rifle will be shot suppressed and unsuppressed, and a brake is desired when shooting without the suppressor.

The 30BAS shares the same mount as the 30BA, which was developed to meet the requirement that some customers have for a suppressor that mounts over a muzzle device. We haven't found a "quick mount" on the market that meets our accuracy and repeatability requirements, so we developed the BA series to mount over our brake and provide the same repeatability as our direct thread attach suppressors, like the 30P-1. The 30BAS features a conical shoulder for rock solid POI repeatability and to make sure it never comes loose.

The 30BAS is ideal for competition or hunting rifles when the absolute suppression level is not as important as having a smaller, compact suppressor. It was designed around .308 and similar capacity cartridges such as .243 Winchester .260 Remington, 6.5 Creedmoor, 6.5x47 Lapua. It is strength-rated up to .300 Winchester Magnum.

The 30BA brake will accept the 338BA suppressor, so with a .30 caliber brake on your .308 and a .338 brake on your .338 Lapua Magnum, you can use a single 338BA suppressor on both. The 30BAS suppressor will not fit on a 338BA brake.

The 30BAS is constructed of titanium with a fully-welded baffle core. This material and construction provides a great strength to weight ratio. It can take whatever your precision rifle can dish out.

Special Features

Brake-in-suppressor design
Conical shoulder surface
100% titanium construction
360-degree fully-welded baffle core
Helical Baffle Technology
Magnum rated
Rock-Solid POI Repeatability

Application Notes

This suppressor is strength-rated for 6.5-284, 7mm Rem Mag, 7mm WSM, .300 Win Mag. Not for use with magnum cartridges with barrel lengths shorter than 22 inches. 7 mm Magnums OK not to exceed 72 grains powder. .30 cal Magnums OK not to exceed 82 grains powder. Minimum barrel length for .308 is 16". Minimum barrel length for .223/5.56 is 14.5" For questions about a particular rifle/load combination please contact us.

Specifications

Caliber .30 caliber, up to .300 Winchester Magnum
Material Titanium
Brake Material Hardened stainless steel
Length 7 inches.
Diameter 1.5 inches.
Weight 12.7 ounces
Brake Threads 1/2-28*, 5/8-24, 9/16-24, 3/4-20, 3/4-24, 3/4-28, M18x1.0, M18x1.5
* Note: The 1/2-28 30BA brake has a .223 caliber aperture!
Finish Black CeraKote; OD Green or FDE available
Use Precision/Long-range rifle, bolt or semi-auto
Price $1145 (one brake included).
Extra brakes $135/ea
"BA" External thread protector, $35
  (not included - sold separately)
How to order a suppressor

BRAKES AND THREAD PROTECTORS AVAILABLE ONLINE

30BA Brake
Each brake includes one peel washer
* Note: The 1/2-28 30BA brake has a .223 caliber aperture!
30BA External Thread Protector

Extra Peel Washers
Peel washers have an O.D. of 0.840-0.845"
and an initial thickness of approx 0.048-0.055".
CB2BA Adapter
Semi-permanently converts a BA series suppressor
to accept the CB series of muzzle devices.
Ionbond finish.
Shipping for web orders is $8.65 for the first item and $4.33 for each subsequent item, for most products. Shipping cost on external thread protectors and extra peel washers is less. Bipods are more.