Re-threading can?

Discussion in 'Silencers' started by reximus, May 7, 2013.

  1. reximus New Member

    reximus
    I saw a post from Zak on here that they "strongly recommend a standard 5/8-24 thread; however, [they] can do any thread pitch," and was wondering if it possible to retro-fit my 30P-1. I'm shooting a DTA now, and rather than re-threading every single conversion, I'd much rather just re-thread my can to match their standard barrel 3/4x24 thread.
    Please let me know if this is possible. My suppressor is still in ATF limbo - I'm also wondering (if this is possible) how I can go about getting the can sent back to for a quick re-thread?
    Thanks,
    reximus
     
  2. Zak Smith Operations

    • Instructor
    Zak Smith
    It's some work but it can be done. I'll send details in the email
     
  3. Laughing_jackal New Member

    Laughing_jackal
    Have you considered going with the Delta-P adapter? I got one for my DTA and its solid. I haven't had any issues with it on my DTA in 300winmag, and can still keep 1/4 MOA at 100yds anyways.
     
  4. Steve Poland New Member

    Steve Poland
    I'm the guy that Zak made that recommendation to and I should have given it more attention! Zak, I finally got my 30P-1 in m18x1 and would like to know what it would take to convert to 5/8x24?
    signed, impatient dumb ass
     
  5. Zak Smith Operations

    • Instructor
    Zak Smith
    Please call for a quote but it should be around $250.
     

Share This Page