22 Takedown Disassembly question.

Discussion in 'Silencers' started by Viper1973, Jun 9, 2019.

  1. Viper1973 New Member

    Viper1973
    I’m needing to clean my 22TD for the first time. Is there a ‘trick’ to separating the short baffle from #10? This is the first time taking it apart.

    All of the others easily pop apart with the disassembly tool but I can’t get the short one to budge? What am I missing? It is supposed to come apart from #10, right?

    Figured it’d be better to ask before potentially screwing something up.
     
  2. Zak Smith Operations

    • Instructor
    Zak Smith
    Put the tool on the last baffle and hold the #10 baffle in your hand. If that doesn't work take a adjustable wrench the same way and it should come off.
     
  3. Viper1973 New Member

    Viper1973
    Zak,

    Thank you so much... that worked!

    The disassembly tool kept slipping off the small baffle. So, following your suggestion, I used my 6” adjustable wrench on the small baffle and the disassembly tool on #10 and was able to get them popped apart.

    I must commend you guys on the precision machining you do. The tolerances you guys keep between parts is truly impressive.
     
  4. Zak Smith Operations

    • Instructor
    Zak Smith
    Glad it worked out!
     

Share This Page